| Printer Method |
Direct Thermal Line Printing |
| Print Speed |
up to 250mm/second |
| Receipt Per Minute throughput speed |
Up to 53 receipts per minute
(standard 20 line receipt) |
Print Resolution
(vertical x horizontal) |
203 x 203 dpi, 406 x 203 dpi |
| Print Density |
7 step selection by memory switch or control command |
| Character Matrix |
12 x 24 dots, 9 x 24 dots |
| Two Colour Print Capability |
Red, Blue and Black
(special paper required) |
| No. of Columns |
48 / 64 or 53 / 71
(depends on Paper Width)
incl. 1st column print for lottery applications |
| Character Set |
ANK 95, 32 Int 128 Graphic |
| International Code Pages |
Star Mode = 40. ESC/POS= 6 & 1 Blank allowing an additional character page to be added |
| Barcodes |
9 versions / PDF 417, QR
(Maxicode Option Pending) |
| Line Spacing |
3mm or 4mm + Programmable |
| Paper Feed Speed |
up to 250mm/sec. |
| Paper Specifications: |
Width |
80mm standard. 82.5 & 58mm also available by simply moving installed paper guide |
| Weight |
0.065 ~ 0.15mm / 63 ~ 150gsm |
| Roll Diameter |
100mm |
| Easy-Load |
"Drop-In & Print" |
| Paper End / Black Mark Sensor |
Standard |
| Near End Sensor |
Two sensors for horizontal and vertical use |
| Maximum Print Width |
80mm paper = 72mm, 82.5 paper = 80mm,
58 paper = 52mm |
| Top Margin |
13mm default (3mm selectable via Memory Switch) |
| External Straight Paper Feed Path |
Standard |
| Autocutter (guillotine) |
Full or Partial cut selectable
(centre cut) |
| Logo Store |
2 Mbit Flash ROMs with graphic management software |
| Flash ROM |
16Mbits |
| Interface versions |
Serial, Parallel, USB, Ethernet |
| Emulation |
Star Line Mode & ESC/POSTM |
| Peripheral Drive Circuit |
2 circuits, (24V max. 1A) 1 Compulsion input |
| Power Consumption |
Operating / Waiting - Average 1.8 / 0.15A |
| Operating Conditions: |
Temperature |
5°C to 45°C |
| Humidity |
10% ~ 90% RH (without condensation) |
| Storage Conditions: |
Temperature |
-20 to 60°C |
| Humidity |
10% ~ 90% RH |
| Dimensions (without interface cover) |
147 (w) x 213 (d) x 148 (h) mm / 1.75 Kg |
| Safety Standards |
UL, C-UL, TÜV, FCC, VCCI, EN55022, CE, Gost |
| Reliability |
Printer |
60 million lines (MCBF) |
| Autocutter |
2 million cuts |
| Options |
Splash Proof cover
Parallel, Serial, Ethernet, USB Interface
Wall & Vertical Mount Kits
(Basic wall mount kit supplied with printer)
Buzzer |
